Nilbac Max Blast, anitbacterial aerosol spray - Nilco
Nilco Nilbac® Dry Touch Max Blast Sanitiser - 750ml
Nilco Nilbac® Dry Touch Max Blast Sanitiser - 750ml
Nilco Nilbac® Dry Touch Max Blast Sanitiser - 750ml
Nilco Nilbac® Dry Touch Max Blast Sanitiser - 750ml
Nilco Nilbac® Dry Touch Max Blast Sanitiser - 750ml
Nilco Nilbac® Dry Touch Max Blast Sanitiser - 750ml
Nilco Nilbac® Dry Touch Max Blast Sanitiser - 750ml
Nilco Nilbac® Dry Touch Max Blast Sanitiser - 750ml

Nilco Nilbac® Dry Touch Max Blast Sanitiser - 750ml

Regular price £12.12 £0.00 Unit price per
Tax included. Shipping calculated at checkout.

 

 

Nilco Nilbac® Dry-Touch Sanitiser MAX BLAST has been specially formulated to quickly and effortlessly sanitise entire rooms and cars in a few short burst.

An average room is between 18 to 22 square metres, Nilco MAX BLAST can deliver 40mls of product per second which means the product can be applied in the average room in under 8 seconds.

Many viruses are spread through droplets which are expelled into the air when a person coughs or sneezes.

The Nilco Nilbac® Dry-Touch Sanitiser MAX BLAST's fine mist gets to work straight away in the air and on contact with all surfaces to remove viruses, bacteria, yeasts, fungi and other harmful microorganisms that can damage health, leaving a clean, purified safe environment.

Sanitise The Whole Room In One... No Wiping ... Just Spray - Commercial strength formula.

The ideal antibacterial aerosol spray

Directions

Rooms and Large Areas

1. Shake can well, ensure the area to be treated is free from pets.

2. Always ensure the nozzle is pointing away from the body. During the spraying process, a suitable face mask should be worn.

3. Keeping a distance of 1.5m from walls, surfaces and objects, spray the product in short bursts methodically over the area to ensure complete coverage.

4. Vacate the area and close all doors, allowing the products to settle throughout the area ideally overnight, or for a minimum of 10 mins.

5. After this time open doors and windows to allow any flammable vapours to disperse.

Vehicles

1. Shake can well, ensure the area to be treated is free from pets and people.

2. Always ensure the nozzle is pointing away from the body. During the spraying process, a suitable face mask should be worn.

3. Keeping a distance of 1.5m from seats, interior fixtures and surfaces, spray one short burst in the front seat of the vehicle and one in the back.

4. Vacate the area and close all doors, allowing the products to settle throughout the area ideally overnight, or for a minimum of 10 mins.

5. After this time open doors and windows to allow any flammable vapours to disperse.

N.B. Ideally, Nilco Nilbac® MAX BLAST should be used after general cleaning when the area will not be used for several hours.

Formulated to BS EN 1276 and BS EN 13697 and is effective against a wide range of bacteria and moulds including Pseudomonas, Escherichia coli (E. coli), Staphylococcus aureus (Staph aureus) including MRSA strain, Enterococcus hirae (Ent. Hirae), Aspergillus niger, Candida albicans.

Nilco Nilbac® MAX BLAST is also suitable for the control of envelope Viruses and has been formulated to BS EN 14476:2013+A2:2019

Patented Technology from Tetrosyl Limited.